1 Ft Of Back Splash Filler Kit
This can be used to fill in a shortage of 12" or less on a back splash section.
For example" If you do not trim the length walls on the 4ft modules and make modules the full 51" long
and put to of them together...
4 Ft Back Splash Panel (requires assembly) Creates a 6" High Back Splash
Cut 2 Fit VALUE PRICE
This is a back splash section 41" high when placed behind a
module built with 35" studs will...
4ft Section of 12" Overhang Kit
This is a kit that provides the pre-cut steel framing parts to make a 4ft section of
12" level over hang. requires assembly.
47 7/8" long x 2 1/2" depth x 12" high over...
4" Over Hang Kit
Sold in 4ft Sections Requires Assembly
4" Over Hnag kit is commonly used for a tile counter top
that over hangs stone veneer.
If you have a granite or concrete slab these can over hang without
2 each 4ft...
Footrest Frame Kit
This is not a pro panel and requires you to screw together.
Made of 20 gauge 33 mil steel that is 6" wide for the perfect foot rest.
Sold only in 4 ft lengths.
You can trim down the 2 length tracks for custom sizes...
BAR GAP FILLER
measures 2 1/2" x 48" with 4" Splip Over
USe to connect over hang around a 90 degree corner or to connect over hang to a table module
32" Diagonal Corner Module requires assembly for new lower price
Perimeter Frame Only Reg price $214.26
4 each length wall tracks for the rear 2 panels
3 each welded tube corners
10 each studs (one for each...
Custom Angle Frame Kit
This is a frame kit that requires assembly (not a module)
It allows you to make a turn at any angle.
1. You touch the front corners of the 2 modules that make the angle
and secure them together at your...
G4000 Kit requires assembly
Ties into a BBQ Coach Split Bar Counter or make stand alone
22" long x 46.75" wide
This kit provides a small rounded table on the end of your island.
It adds approx 22" to the length of the...